Mr Jump

Mr Jump Technical features

Safety

helmet must fit tightly To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head.
If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility.
OUTER SHELL
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins.
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.

D-RING RETENTION SYSTEM The D-RING RETENTION SYSTEM has been designed and patented by Suomy.
Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw.
After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test.
If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab.
The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs.
To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.

Homologations

MRJUMP is homologated as per the following rules:

ECE 22-05 Europe
DOT America and Canada
JIS Japan
INMETRO NBR 7471 Brasil


You have to refer always to the homologation of the country in which the helmet is sold.

Internal comfort

Internal comfort CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.

INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product.
The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.

INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
  • Wicks sweat away from the body.
  • Keeps the user fresh, dry and comfortable.
  • Lightweight, soft and breathable fabric.
  • Performance verified and certified by ADVANSA.

Sizes

Sizes SIZES CM INCH
XS 53/54 6 1/2” - 6 5/8”
S 55/56 6 3/4” – 6 7/8”
M 57/58 7” – 7 1/8”
L 59/60 7 1/4” – 7 3/8”
XL 61/62 7 1/2” – 7 5/8”
XXL 63/64 7 3/4” – 7 7/8”

Ventilation

The SHELL is in polystyrene with channels for air flows.
In the front part there are upper and back air ventilations, which help the internal helmet ventilation.
On the CHIN GUARD there is an air ventilation for the front ventilation.

Aerodynamics

PEAK The OUTER SHELL has ribs to channel better the air flows.

The PEAK has an aereodynamic impact.
The wide open space in the front allows the use of any kind of glasses.

Spare Parts

Spare Parts

SPARE PARTS DESCRIPTIONCODE
Inner Covered Chin Guard   KAMJ0M00
 
Chin Guard Air Vent White KAMJVM01
Black KAMJVM02
 
Screw Kit   KAMJVF00
 
Inner Comfort Liner
removable and washble
Size XS KAMJ0I01
Size S KAMJ0I02
Size M KAMJ0I03
Size L KAMJ0I04
Size XL KAMJ0I05
Size XXL KAMJ0I06
 
Cheek Pads Size XS KAMJ0L01
Size S KAMJ0L02
Size M KAMJ0L03
Size L KAMJ0L04
Size XL KAMJ0L05
Size XXL KAMJ0L06
 
Peak Available for each graphic

Graphics

KSMJ00W3 - Plain White   KSMJ00W5 - Plain Orange
KSMJ0001 - Black Magic   KSMJ0004 - Killer Loop
KSMJ0016 - S-Line Orange   KSMJ0017 - S-Line Green
KSMJ0018 - S-Line Sparkling   KSMJ0019 - Jackpot White
KSMJ0020 - Jackpot Yellow   KSMJ0021 - Jackpot Fuxia
KSMJ0022 - Eagle White   KSMJ0023 - Eagle Black
KSMJ0024 - Molotov White   KSMJ0025 - Molotov Orange
KSMJ0026 - Assault   KSMJ0027 - Bullet
We use cookies, if you continue we assume that you consent to receive cookies.